40 results
| GB/T | ASTM | EN | JIS | ISO |
|---|---|---|---|---|
| 06Cr19Ni10 | 304 | 1.4301 | SUS304 | X5CrNi18-10 |
| 022Cr19Ni10 | 316L | 1.4404 | SUS316L | X2CrNiMo17-12-2 |
| 022Cr17Ni12Mo2 | 316 | 1.4401 | SUS316 | X5CrNiMo17-12-2 |
| 06Cr18Ni11Ti | 321 | 1.4541 | SUS321 | X6CrNiTi18-10 |
| 022Cr23Ni5Mo3N | 2205 | 1.4462 | SUS329J3L | X2CrNiMoN22-5-3 |
| 022Cr19Ni10 | 304L | 1.4307 | SUS304L | X2CrNi18-9 |
| 06Cr17Ni12Mo2 | 316Ti | 1.4571 | SUS316Ti | X6CrNiMoTi17-12-2 |
| 022Cr19Ni13Mo3 | 317L | 1.4438 | SUS317L | X2CrNiMo18-15-4 |
| S32205 | 2205 | 1.4462 | SUS329J3L | X2CrNiMoN22-5-3 |
| S32750 | 2507 | 1.4410 | SUS329J4L | X2CrNiMoN25-7-4 |
How chloride exposure, temperature and maintenance decide between 304, 316L and duplex grades.
ARTICLECertificates, traceability, inspection reports and what to verify before the first order.
ARTICLEThe same tonne of stainless has three different cost structures depending on the form you buy.
ARTICLENominal thickness is not a promise — the acceptance range is.
ARTICLEWhy heat tint must be removed and how to specify cleaning after welding.
Part of a 316L frame will be painted, the rest stays bare. Do the weld seams under paint still need passivation?
A German customer expects 3-week delivery for cut-to-length 316L sheet from an Asian supplier. Is that realistic, and what should we promise?
We receive 2205 plate and need a quick incoming check before cutting. A full chemical analysis takes days. What can we do in-house?
Methods A, B and C, how test conditions differ from service, and the limits of the result.
We are shipping 500 mm 304 circles to a cookware factory. Last shipment had bent edges. What packaging works for circles?
A supplier quotes 'annealed and pickled' 316L plate, another quotes 'hot rolled, annealed'. Is there a meaningful difference in corrosion resistance or mechanical properties?
We are laser welding thin 304 sheet for appliance panels. Some references say argon, some helium mix. What do you use for consistent cosmetic welds?
We received an EN 10204 3.1 certificate that looks right, but the heat number cannot be found on the mill's website. How do buyers actually verify these?
A customer wants to cut cost by using 304L instead of 316L for a urea solution tank at ambient temperature. Is that acceptable from a corrosion standpoint?
We are building a stainless conveyor frame for a dairy plant. The fabricator offers 2B or No.4. Does the finish matter for cleaning and inspection, or is it purely cosmetic?
For site-installed 316L pipework, the contractor wants to use pickling paste on weld seams. Is that acceptable, or should we require electrolytic cleaning?
